100% Pass!Do you want to pass Microsoft 70-417 exam quickly? Go to flydumps.com to get more free exam dumps.All the Microsoft 70-417 exam dumps are timely updated by the professional experts. Also we guarantee 100% pass and money back guarante
QUESTION 1
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
On Server1, you create and start a virtual machine named VM1. VM1 is configured as shown in the following table.
You plan to create a checkpoint of VM1.
You need to recommend a solution to minimize the amount of disk space used for the checkpoint of VM1.
What should you do before you create the checkpoint?
A. Decrease the Maximum RAM.
B. Convert Disk1.vhd to a dynamically expanding disk.
C. Run the Stop-VM cmdlet.
D. Run the Resize-VHD cmdlet.
Correct Answer: C Explanation
Explanation/Reference:
Explanation: For checkpoints created when the virtual machine is stopped The checkpoint contains the state of the hard disks only. For checkpoints created when the virtual machine is running The checkpoint contains the state of the hard disks and the data in memory. Note: A checkpoint saves the state of each virtual hard disk that is attached to a virtual machine and all of the hard disk’s contents, including application data files. For virtual machines on Hyper-V and VMware ESX Server hosts, a checkpoint also saves the hardware configuration information. By creating checkpoints for a virtual machine, you can restore the virtual machine to a previous state.
QUESTION 2
Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
You install a network monitoring application on VM2.
You need to ensure that all of the traffic sent to VM3 can be captured on VM2.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Correct Answer: J Explanation
Explanation/Reference:
Explanation: With Hyper-V Virtual Switch port mirroring, you can select the switch ports that are monitored as well as the switch port that receives copies of all the traffic. And since Port mirroring allows the network traffic of a virtual machine to be monitored by copying the traffic and forwarding it to another virtual machine that is configured for monitoring, you should configure port mirroring on VM2. References: http://technet.microsoft.com/en-us/library/jj679878.aspx#bkmk_portmirror
QUESTION 3
Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
You plan to schedule a complete backup of Server1 by using Windows Server Backup.
You need to ensure that the state of VM1 is saved before the backup starts.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Correct Answer: I Explanation
Explanation/Reference:
Explanation: The Integration Services settings on virtual machines include services such as operating system shutdown, time synchronization, data exchange, Heartbeat, and Backup (volume snapshot services). This snapshot will ensure that the state of VM1 is saved prior to backup. References: http://msdn.microsoft.com/en-us/library/dd405549(v=vs.85).aspx Exam Ref 70-410, Installing and Configuring Windows Server 2012, Chapter 3: Configure Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p. 144
QUESTION 4
Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
VM3 is used to test applications.
You need to prevent VM3 from synchronizing its clock to Server1.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Correct Answer: I Explanation
Explanation/Reference:
Explanation:
Integration Services settings on virtual machines includes services such as operating system shutdown,
time synchronization, data exchange, Heart beat, and Backup (volume snapshot services. Thus you
should disable the time synchronization using Integration Services.
References:
http://blogs.technet.com/b/virtualization/archive/2008/08/29/backing-up-hyper-v-virtual- machines.aspx
Exam Ref 70-410, Installing and Configuring Windows Server 2012, Chapter 3: Configure Hyper-V,
Objective 3.1: Create and Configure virtual machine settings, p. 144
QUESTION 5
Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
VM2 sends and receives large amounts of data over the network.
You need to ensure that the network traffic of VM2 bypasses the virtual switches of the parent partition.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Correct Answer: K Explanation
Explanation/Reference:
Explanation:
Single-root I/O virtualization -capable network adapters can be assigned directly to a virtual machine to
maximize network throughput while minimizing network latency and the CPU overhead required for
processing network traffic.
References:
http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx http://technet.microsoft.com/en-us/
library/hh831410.aspx Exam Ref 70-410, Installing and Configuring Windows Server 2012, Chapter 3:
Configure Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p. 144 Training Guide:
Installing and Configuring Windows Server 2012: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying
and configuring virtual machines, p. 335
QUESTION 6
You perform a Server Core Installation of Windows Server 2012 R2 on a server named Server1.
You need to add a graphical user interface (GUI) to Server1.
Which tool should you use?
A. The imagex.exe command
B. The ocsetup.exe command
C. The setup.exe command
D. The dism.exe command
Correct Answer: D Explanation
Explanation/Reference:
The DISM command is called by the Add-WindowsFeature command. Here is the systax for DISM: Dism /online /enable-feature /featurename:ServerCore-FullServer /featurename:Server- Gui- Shell / featurename:Server-Gui-Mgmt
QUESTION 7
You have a server named Server1 that runs Windows Server 2012 R2.
You plan to create an image of Server1.
You need to remove the source files for all server roles that are not installed on Server1.
Which tool should you use?
A. dism.exe
B. servermanagercmd.exe
C. ocsetup.exe
D. imagex.exe
Correct Answer: A Explanation
Explanation/Reference:
Explanation:
The Dism utility can be used to create and mount an image of Server1.
References:
http://technet.microsoft.com/en-us/library/cc749447(v=ws.10).aspx http://technet.microsoft.com/en-us/
library/dd744382(v=ws.10).aspx Training Guide: Installing and Configuring Windows Server 2012: Chapter
2: Deploying Servers, p. 44 Exam Ref 70-410: Installing and Configuring Windows Server 2012: Chapter 1: Installing and Configuring Servers, p. 19-22
QUESTION 8
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has following storage spaces:
Data
Users
Backups
Primordial
You add an additional hard disk to Server1.
You need to identify which storage space contains the new hard disk.
Which storage space contains the new disk?
A. Primordial
B. Data
C. Backups
D. Users
Correct Answer: A Explanation
Explanation/Reference:
Explanation:
New Disks (Unallocated space) added to Primordial space.
References:
http://blogs.technet.com/b/canitpro/archive/2012/12/13/storage-pools-dive-right-in.aspx
QUESTION 9
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012.
You create a group Managed Service Account named gservice1.
You need to configure a service named Service1 to run as the gservice1 account.
How should you configure Service1?
A. From a command prompt, run ss.exe and specify the config parameter.
B. From a command prompt, run ss.exe and specify the sdset parameter.
C. From the Services console, configure the General settings.
D. From Windows PowerShell, run Set-Service and specify the -PassThrough parameter.
Correct Answer: C Explanation
Explanation/Reference:
*
Services are often run with default settings — for example, a service might be disabled automatically at
startup. You can use the Services snap-in to change the default settings for a service.
*
To configure how a service is started using the Windows interface
1.
ClickStart , click in theStart Search box, typeservices.msc , and then press ENTER.
2.
Optionally, export and save a list of the existing settings. To do this, right-clickServices , selectExport
List , and save the settings list.
3.
In the details pane, right-click the service that you want to configure, and then clickProperties .
4.
On theGeneral tab, inStartup type , clickAutomatic ,Manual ,Disabled , orAutomatic (Delayed Start) .
5.
To specify the user account that the service can use to log on, click theLog On tab, and then do one of
the following:
Etc.
http://technet.microsoft.com/en-us/library/ee176963.aspx http://technet.microsoft.com/en-us/library/ cc990290(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc738230(v=ws.10).aspx
QUESTION 10
You have a server named Data1 that runs a Server Core Installation of Windows Server 2012 R2 Standard.
You need to configure Data1 to run a Server Core Installation of Windows Server 2012 R2 Datacenter. You want to achieve this goal by using the minimum amount of administrative effort.
What should you perform?
A. An online servicing by using Dism
B. An offline servicing by using Dism
C. An upgrade installation of Windows Server 2012 R2
D. A clean installation of Windows Server 2012 R2
Correct Answer: A Explanation
Explanation/Reference:
Explanation:
There are a couple of ways to install the GUI from the command prompt, although both use the same tool -DISM (Deployment Image Service Manager). When you are doing it for a single (local) server, the
command is:
Dism /online /enable-feature /featurename:ServerCore-FullServer /featurename:…
References:
Training Guide: Installing and Configuring Windows Server 2012: Chapter 2: Deploying Servers, p. 44
Exam Ref 70-410: Installing and Configuring Windows Server 2012: Chapter 1: Installing and Configuring
Servers, p. 19-22
The Microsoft 70-417 training is a vital way of becoming the best.This Microsoft 70-417 certification has helped the candidates to enhance their capabilities by providing a great learning platform to them so that they can polish their skills.
