Welcome to download the newest Pass4itsure C2020-011 VCE dumps: http://www.pass4itsure.com/C2020-011.html
The FLYDUMPS HP HP3-X09 exam sample questions frames the inquiries and sets the paper the way in which you’ll be able to expect within the genuine Certified Internal certification exam. Ahead of you acquire our FLYDUMPS HP HP3-X09 exam sample questions, we will give you free demo to create positive its quality. In this way, we do away with customers’ misgiving and support them to create the proper option. The FLYDUMPS HP HP3-X09 exam sample questions are updated on schedule according to alter from the actual exam to make sure that the question coverage is at all times above 566% and that our customers get the important material for the examination. The quality of the FLYDUMPS HP HP3-X09 exam sample questions has been tested by thousands of IT examiners who have passed the exam successfully with our product.
QUESTION NO: 1
Which part on an HP Compaq dx7400 Business Desktop PC requires the least technical ability to replace?
A. ReadyBoost module
B. fan duct
C. hard drive
D. optical drive
Answer: C Explanation:
QUESTION NO: 2
You are servicing an HP Pro 2000 Business Desktop PC when you see the power LED indicator flash red and beep five times (once per second) followed by a two-second pause. Which condition does this indicate?
A. system board failure
B. system overheating
C. pre-video graphics error
D. pre-video memory error
Answer: C Explanation:
QUESTION NO: 3
The Power LED indicator on an HP Pro 3005 Microtower is flashing red, and beeps a sound eight times, once per second, followed by a two-second pause. What does this indicate?
A. CPU thermal shutdown resulting from a weak CPU fan.
B. memory modules that have been installed incorrectly or incorrect modules being used
C. System board failure or invalid ROM basing on checksum.
D. unsuccessful BIOS recovery that must be reinitiated
Answer: C Explanation:
QUESTION NO: 4
An HP Compaq dc5850 Microtower PC has a total of 4GB RAM installed, but the operating system only sees 3GB. What is the probable cause?
A. The operating system only supports applications that require a maximum of 3BG of memory.
B. A 32-bit Windows system is limited to addressing 4GB of memory, and some of the space is used by I/O devices.
C. The memory modules are not the correct type or speed to support 4GB or they are not seated properly.
D. The memory is not configured properly in Windows Device Manager.
Answer: B Explanation:
QUESTION NO: 5
You are troubleshooting a problem with an HP Compaq dc5800 Business Desktop PC when you see the power LED blink red seven times (once per second) followed by a two-second pause.
Which issue does this indicate?
A. system board failure
B. thermal shutdown
C. processor not installed
D. pre-video memory error
Answer: A Explanation:
QUESTION NO: 6
A user reports that an HP Compaq dx7500 Business Desktop PC seems locked up and will not power off, even when the power button is pressed. What is the probable cause?
A. Software control of the power switch is not functional.
B. The computer is in standby mode and operation must be resumed before powering down.
C. The processor is overheating and power to the computer has been suspended.
D. Memory is installed incorrectly or is bad.
Answer: B Explanation:
QUESTION NO: 7
What is the proper order for tightening the four screws on the heatsink of an HP Compaq dx7400 Business Desktop PC?
A. clockwise starting at the top
B. counter-clockwise startingat the bottom
C. incrementally tighten diagonally opposing pairs
D. incrementally tighten the top two before the bottom two
Answer: D Explanation:
QUESTION NO: 8
During POST operations on an HP Compaq dx7500 Business Desktop PC, you hear one short beep and one long beep followed by a three-second pause. Which component has failed?
A. graphics card
B. CPU
C. hard drive
D. memory
Answer: D Explanation:
QUESTION NO: 9
You serviced an HP rp5700 Point of Sale System, but when you powered it back on, the power LED turned red and remained that way. What is the cause?
A. The computer is in standby mode.
B. The memory modules are not seated correctly.
C. The processor is not seated correctly.
D. The hard disk has reached capacity.
Answer: B Explanation:
QUESTION NO: 10
What is the correct way to handle the processor in an HP desktop PC during removal?
A. by its sides
B. by its corners
C. by its underside
D. by its top
Answer: C
HP HP3-X09 Exam Certification Guide presents you with an organized test preparation routine through the use of proven series elements and techniques.“Do I Know This Already?”quizzes open each chapter and allow you to decide how much time you need to spend on each section. HP HP3-X09 lists and Foundation Summary tables make referencing easy and give you a quick refresher whenever you need it.Challenging HP HP3-X09 review questions help you assess your knowledge and reinforce key concepts. HP HP3-X09 exercises help you think about exam objectives in real-world situations,thus increasing recall during exam time.
Pass4itsure C2020-011 dumps with PDF + Premium VCE + VCE Simulator: https://www.pass4itsure.com/c2020-011.html
HP HP3-X09 Exam Demo, New Updated HP HP3-X09 Study Material Latest Version PDF&VCE