The latest updates Microsoft MCSA 70-741 dumps, 70-741 pdf free download, 70-741 exam practice test questions to improve your skills.
“Networking with Windows Server 2016” 70-741 Exam. Easy to pass the exam: Pass4itsure.com!
The latest Microsoft MCSA 70-741 pdf free download
[PDF] Free Microsoft 70-741 pdf dumps download from Google Drive: https://drive.google.com/open?id=1tFtKCUyMkbh4EAQwnfhp76Ud-xQCesIM
[PDF] Free Full Microsoft pdf dumps download from Google Drive: https://drive.google.com/open?id=1gdQrKIsiLyDEsZ24FxsyukNPYmpSUDDO
Valid information provided by Microsoft officials
Exam 70-741: Networking with Windows Server 2016 – Microsoft: https://www.microsoft.com/en-us/learning/exam-70-741.aspx Candidates for this exam perform tasks related to the networking features and functionalities available in Windows Server 2016. Candidates should have familiarity with implementing and managing DNS, DHCP, and IPAM, as well as deploying remote access solutions such as VPN and RADIUS.
Candidates should also have experience managing DFS and branch cache solutions, configuring high-performance network features and functionality, and implementing Software Defined Networking (SDN) solutions such as Hyper-V Network Virtualization (HNV) and Network Controller.
pass4itsure 70-741 exam Skills measured
This exam measures your ability to accomplish the technical tasks listed below.
- Implement Domain Name System (DNS) (15-20%)
- Implement DHCP and IPAM (25-30%)
- Implement Network Connectivity and Remote Access Solutions (20-25%)
- Implement Core and Distributed Network Solutions (15-20%)
- Implement an Advanced Network Infrastructure (15-20%)
Latest Microsoft MCSA 70-741 Exam Practice Test Questions and Answers
QUESTION 1
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may
be correct for more than one question in the series. Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question.
Your network contains Windows and non-Windows devices.
You have a DHCP server named Server1 that has an IPv4 scope named Scope1.
You need to prevent a client computer that uses the same name as an existing registration from updating the
registration.
What should you do?
A. From the properties of Scope1, modify the Conflict detection attempts setting.
B. From the properties of Scope1, configure Name Protection.
C. From the properties of IPv4, configure the bindings.
D. From IPv4, create a new filter.
E. From the properties of Scope1, create an exclusion range.
F. From IPv4 run the DHCP Policy Configuration Wizard.
G. From Control Panel, modify the properties of Ethernet.
H. From Scope1, create a reservation.
Correct Answer: B
QUESTION 2
You have two servers named Server1 and Server2 that run Windows Server 2016. Both servers have the DHCP Server
server role installed.
Server1 has a DHCP scope named Scope1. Server2 has a DHCP scope named Scope2.
You need to ensure that client computers can get an IP address if a single DHCP server fails. You must be able to
control the percentage of requests to which each DHCP server responds during normal network operations.
What should you do?
A. Add Server1 and Server2 as nodes in a failover cluster, and then configure the DHCP Server server role.
B. Add Server1 and Server2 as nodes in a failover cluster, and then configure the quorum mode.
C. On Server1 and Server2, configure DHCP failover for Scope1 and Scope2.
D. Add Server1 and Server2 as nodes in a failover cluster, and then configure port rules for UDP 67 and UDP 68.
Correct Answer: C
QUESTION 3
Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server
named Server2 that runs Windows Server 2016.
Server2 has 10 IPv4 scopes.
You need to ensure that the scopes are backed up every 30 minutes to the folder D:\DHCPBackup.
What should you run?
A. dism.exe
B. dns.exe
C. dnscmd.exe
D. netsh.exe
E. Set-DhcpServerDatabase
F. Set-DhcpServerv4DnsSetting
G. Set-DhcpServerv6DnsSetting
H. Set-DNSServerSetting
Correct Answer: E
QUESTION 4
You have 2000 devices, One hundred of the devices are mobile devices that have physical addresses beginning with
98-5F.
You have a DHCP server named Server1.
You need to ensure that the mobile devices register their host name by using a DNS suffix of mobile.contoso.com
A. From the properties of Scopte1, Modify the Conflict detection attempts setting.
B. From the properties of Scope1, Configure Name Protection.
C. From the Properties of IPV4, configure the bindings.
D. From IPV4, create a new filter.
E. From the properties of Scope1, create an exclusion range.
F. From IPv4, run the DHCP Policy Configuration Wizard.
G. From Control Panel, modify the properties of Ethernet.
H. From Scope1, create a reservation
Correct Answer: F
QUESTION 5
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named
Server1. All client computers run Windows 10 and are configured as DHCP clients. Your helpdesk received calls today
from
users who failed to access the network from their Windows 10 computer.
You open the DHCP console as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that all of the Windows 10 computers can receive a DHCP lease.
Solution: You activate the scope.
Does this meet the goal?
A. Yes
B. No
Correct Answer: A
https://technet.microsoft.com/en-us/library/dd183581(v=ws.10).aspx
QUESTION 6
You have a server named Host1 that runs Windows Server 2016.
You configure Host1 as a virtualization host and create 20 new virtual machines on Host1.
You need to ensure that all of the virtual machines can connect to the Internet through Host1.
Which three actions should you perform? Each correct answer presents part of the solution.
A. On a virtual machine, install the Remote Access server role.
B. From the properties of each virtual machine, enable virtual LAN identification.
C. From the properties of each virtual machine, connect to the virtual machine switch.
D. On Host1, configure the network address translation (NAT) network.
E. On Host1, create an internal virtual machine switch and specify an IP address for the switch.
Correct Answer: CDE
https://technet.microsoft.com/en-us/library/ee449441(v=ws.10).aspx
QUESTION 7
You have a Hyper-V server named Server1 that runs Windows Server 2016. Server1 has an IP address of
192.168.1.78. Server1 has a container named Container1 that hosts a web application on port 84. Container1 has an IP
address of
172.16.5.6. Container1 has a port mapping from port 80 on Server1 to port 84 on Container1. You have a server named
Server2 that has an IP address of 192.168.1.79, You need to connect to the web application from Server2. To which IP
address and port should you connect?
A. 172.16.5.6:80
B. 192.168.1.78:80
C. 172.16.5.6:84
D. 192.168.1.78:84
Correct Answer: C
QUESTION 8
You have a test environment that includes two servers named Server1 and Server2. The severs run Windows Server
2016. You need to ensure that you can implement SMB Direct between the servers. Which feature should the servers
support?
A. (RDMA)
B. Multipath I/O (MPIO)
C. virtual machine queue (VMQ)
D. single root I/O virtualization (SR-IOV)
Correct Answer: A
https://technet.microsoft.com/en-us/library/jj134210%28v=ws.11%29.aspx?f=255andMSPPError=-2147217396
QUESTION 9
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is
repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is
exactly the same in each question in this series.
Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows
Server 2012.
The network uses an address space of 192.168.0.0/16 and contains multiple subnets.
The network is not connected to the Internet.
The domain contains three servers configured as shown in the following table.
Client computers obtain TCP/IP settings from Server3.
You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the
Routing role service on Server2.
Server1 has four DNS zones configured as shown in the following table.
You need to create a zone to ensure that Server1 can resolve single-label names. What should you name the zone on
Server1?
A. . (root)
B. WINS
C. NetBIOS
D. GlobalNames
Correct Answer: D
https://technet.microsoft.com/en-us/library/cc816610(v=ws.10).aspx
QUESTION 10
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named
Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration.
You have the following subnets defined on Server1.
You need to prevent Server1 from resolving queries from DNS clients located on Subnet4. Server1 must resolve queries
from all other DNS clients.
Solution: From Windows Firewall with Advanced Security on Server1, you create an inbound rule.
Does this meet the goal?
A. Yes
B. No
Correct Answer: B
https://technet.microsoft.com/en-us/library/dd421709(v=ws.10).aspx
QUESTION 11
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named
Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration.
You have the following subnets defined on Server1.
You need to prevent Server1 from resolving queries from DNS clients located on Subnet4. Server1 must resolve queries
from all other DNS clients.
Solution: From Windows PowerShell on Server1, you run the Add-DnsServerQueryResolutionPolicy cmdlet.
Does this meet the goal?
A. Yes
B. No
Correct Answer: A
https://technet.microsoft.com/en-us/itpro/powershell/windows/dns-server/add-dnsserverqueryresolutionpolicy
QUESTION 12
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions,
while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN server.
Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00 everyday of the week.
You need to ensure that domain users can establish VPN connections only between Monday and Friday.
Solution: From Network Policy Server, you modify the Network Policies on Server1.
Does this meet the goal?
A. Yes
B. No
Correct Answer: A
QUESTION 13
Your company has a main office in London and a branch office in Seattle. The offices connect to each other by using a
WAN link.
In the London office, you have a Distributed File System (DFS) server named FS1 that contains a folder named
Folder1.
In the Seattle office, you have a DFS server named FS2.
All servers run Windows Server 2016.
You configure replication of Folder1 to FS2.
Users in both offices frequently add files in Folder1.
You monitor DFS Replication, and you discover excessive replication over the WAN link during business hours.
You need to reduce the amount of bandwidth used for replication during business hours. The solution must ensure that
the users can continue to save content to Folder1.
What should you do?
A. Modify the quota settings on Folder1 on FS2.
B. Modify the properties of the replication group.
C. Configure the copy of Folder1 on FS2 as read-only.
D. Modify the replicated folder properties of Folder1 on FS1.
Correct Answer: B
Follow us! We update the latest effective exam dumps throughout the year to help you improve your skills! Microsoft MCSA 70-741 dumps share for free! Easy via 70-741 exam: https://www.pass4itsure.com/70-741.html (Q&As: 251)
Pass4itsure Promo Code 15% Off
Why Choose Pass4itsure?
Pass4itsure is the best provider of IT learning materials and the right choice for you to prepare for the Microsoft 70-741 exam. Other brands started earlier, but the price is relatively expensive and the questions are not the newest. Pass4itsure provides the latest real questions and answers with the lowest prices, help you pass 70-741 exam easily at first try.