I just want a lot of inexperienced people here to be able to get this certification without having Microsoft MD-100 experience. How’d I done it? I started with the Pass4itSure MD-100 practice test and practiced it daily until I got 90 points each time.
Then you are not far away from successful passage! You must be wondering, where did the MD-100 practice questions come from?
Will tell you the true and reliable Microsoft MD-100 practice test from https://www.pass4itsure.com/md-100.html ( MD-100 dumps Q&As: 301).
Microsoft MD-100 practice test [Online Practice Questions Free]
QUESTION 1
Your network contains an Active Directory domain. The domain contains a user named Admin1. All computers run
Windows 10.
You enable Windows PowerShell remoting on the computers.
You need to ensure that Admin1 can establish remote PowerShell connections to the computers. The solution must use
the principle of least privilege.
To which group should you add Admin1?
A. Access Control Assistance Operators
B. Power Users
C. Remote Desktop Users
D. Remote Management Users
Correct Answer: D
References: https://4sysops.com/wiki/enable-powershell-remoting/
QUESTION 2
You are troubleshooting the network connectivity of a computer that runs Windows 10. The computer is connected
physically to the network but rejects network traffic from an external source.
You need to reinstall the TCP/IP stack on the computer.
What should you run?
A. the netsh int ip resetcommand
B. the Reset-NetAdapterAdvancedPropertycmdlet
C. the netcfg -dcommand
D. the Debug-NetworkControllercmdlet
Correct Answer: A
Reference: https://howtofix.guide/reset-tcp-ip/
QUESTION 3
You have a computer that runs Windows 10.
The computer fails to start, and you receive the following error message: “BOOTMGR image is corrupt.
The system cannot boot”.
You need to repair the system partition.
Which command should you run from Windows Recovery Environment (WinRE)?
A. fdisk.exe
B. chkdsk.exe
C. diskpart.exe
D. bcdboot.exe
Correct Answer: C
DiskPart, which has replaced fdisk, is a command-line utility that provides the ability to manage disks, partitions or
volumes in your computer running all versions of the operating system since Windows 2000.
References: https://www.diskpart.com/windows-10/diskpart-windows-10-1203.html
QUESTION 4
You need to recommend a solution to monitor update deployments. What should you include in the recommendation?
A. Windows Server Update (WSUS)
B. the Update Management solution in Azure Automation
C. the Update Compliance Solution in Azure Log Analytics
D. the Azure Security Center
Correct Answer: C
References: https://docs.microsoft.com/en-us/windows/deployment/update/update-compliance-monitor
QUESTION 5
You need to ensure that Client3 starts in safe mode automatically the next time the computer restarts. After completing
the task, you must NOT restart Client3.
To complete this task, sign in to the required computer or computers.
Correct Answer: See below.
1. From Client3, open the System Configuration utility by pressing the Windows and R keys simultaneously to display the Run box.
2. Type “MSConfig” into the box, and then click OK.
3. In the “System Configuration” window, switch to the “Boot” tab.
4. Enable the “Safe Boot” check box, and then make sure the “Minimal” option below that is selected. Click the “OK”
button when you’re done.
5. You will be prompted to Restart or Exit without restart. Click Exit without restart.
QUESTION 6
You have a computer that runs Windows 10.
You can start the computer but cannot sign in.
You need to start the computer into the Windows Recovery Environment (WinRE).
What should you do?
A. Turn off the computer. Turn on the computer, and then press F8.
B. Turn off the computer. Turn on the computer, and then press F10.
C. From the sign-in screen, hold the Shift key, and then click Restart.
D. Hold Alt+Ctrl+Delete for 10 seconds.
Correct Answer: C
QUESTION 7
You have a VPN server that accepts PPTP and L2TP connections and is configured as shown in the following exhibit.
A user named User1 has a computer that runs Windows 10 and has a VPN connection configured as shown in the
following exhibit.
User1 fails to establish a VPN connection when connected to a home network.
You need to identify which VPN client setting must be modified.
What should you identify?
A. ServerAddress
B. TunnelType
C. AuthenticationMethod
D. L2tpIPsecAuth
E. EncryptionLevel
Correct Answer: A
The server address is a private IP address. This needs to be the public IP address of the VPN server.
QUESTION 8
Your network contains an Active Directory domain. The domain contains 1,000 computers that run Windows 10. You
need to prevent the computers of the research department from appearing in Network in File Explorer. What should you do?
A. Configure DNS to use an external provider
B. Modify the %systemroot%\system32\drivers\etc\Networks file.
C. Turn off network discovery.
D. Disable the Network List Service.
Correct Answer: C
QUESTION 9
You have a computer named Computer1 that runs Windows 10.
You deploy an application named Application1 to Computer1.
You need to assign credentials to Application1.
You need to meet the following requirements:
1. Ensure that the credentials for Application1 cannot be used by any user to log on to Computer1.
2. Ensure that the principle of least privilege is maintained. What should you do?
A. Configure Application1 to sign in as the Local System account and select the Allow service to interact with a desktop
check box.
B. Create a user account for Application1 and assign that user account the Deny log on locally user right
C. Create a user account for Application1 and assign that user account the Deny log on as a service user right
D. Configure Application1 to sign in as the Local Service account and select the Allow service to interact with a desktop
check box.
Correct Answer: B
By using the Service1 account as the identity used by Application1, we are applying the principle of least privilege as
required in this question.
However, the Service1 account could be used by a user to sign in to the desktop on the computer. To sign in to the
desktop on the computer, an account needs the log on locally right which all user accounts have by default. Therefore,
we can prevent this by assigning Service1 the deny log on locally user right.
Incorrect Answers:
A: Configuring Application1 to sign in as the Local System account would ensure that the identity used by Application1
cannot be used by a user to sign in to the desktop on Computer1. However, this does not use the principle of least
privilege. The Local System account has full access to the system. Therefore, this solution does not meet the goal.
C: A service account needs the log on as a service user right. When you assign an account to be used by a service, that
account is granted the log-on as a service user right. Therefore, assigning Service1 the deny log on as a service user
right would mean the service would not function.
D: The Local Service account is a predefined local account used by the service control manager.
QUESTION 10
You deploy Windows 10 to several computers. The computers will be used by users who frequently present their
desktops to other users.
You need to prevent applications from generating toast notifications in the notification area.
Which settings should you configure from the Settings app?
A. Shared experiences
B. Privacy
C. Focus assist
D. Tablet mode
Correct Answer: C
Focus Assist will automatically hide incoming notifications, so they don\’t pop up and distract you while you\’re playing
a game, giving a presentation, or using a full-screen application.
Incorrect Answers:
A: Shared Experiences allow you to start a task on one device and finish it on another device.
D: Tablet mode makes Windows 10 more touch-friendly when using your device as a tablet.
References: https://www.howtogeek.com/435349/how-to-disable-windows-10s-annoying-focus-assist-notifications/
QUESTION 11
You need to enable BitLocker Drive Encryption (BitLocker) on a computer named Computer1 that runs Windows 10.
Computer1 has the following configurations:
1. Contains only one 200-GB NTFS volume named C:\
2. Contains 50 GB of unallocated disk space
3. Is the member of a workgroup
4. Has TPM enabled What should you do first?
A. Create a VHD.
B. Disable TPM.
C. Create an additional volume.
D. Join Computer1 to an Azure Active Directory (Azure AD) tenant.
Correct Answer: C
Two partitions are required to run BitLocker because pre-startup authentication and system integrity verification must
occur on a separate partition from the encrypted operating system drive. This configuration helps protect the operating system and the information in the encrypted drive.
QUESTION 12
You have a computer that runs Windows 10.
You discover that Windows updates are failing to install on the computer.
You need to generate a log file that contains detailed information about the failures.
Which cmdlet should you run?
A. Get?ogProperties
B. Get?indowsErrorReporting
C. Get?indowsUpdateLog
D. Get?inEvent
Correct Answer: C
References: https://docs.microsoft.com/en-us/powershell/module/windowsupdate/get-windowsupdatelog?view=win10-ps
QUESTION 13
You install Windows 10 Pro on a computer named CLIENT1.
You need to ensure that all per-user services are disabled on CLIENT1. The solution must minimize administrative
effort.
What should you use?
A. a Group Policy administrative template
B. Device Manager
C. Task Manager
D. Group Policy preferences
Correct Answer: D
References: https://docs.microsoft.com/en-us/windows/application-management/per-user-services-in-windows
Newest Microsoft MD-100 dumps pdf download [PDF Format]
google drive: https://drive.google.com/file/d/1YCCH3C8CGwfZzpfjRKtlGOBgJFy173o7/view?usp=sharing
From now on,
the first thing you should do is never tell anyone that you have no MD-100 exam experience, you just need to practice hard. I have said before, to get the real Microsoft MD-100 exam practice questions, which are from the Pass4itSure Microsoft MD-100 exam dump!
>>> https://www.pass4itsure.com/md-100.html (MD-100 dumps pdf +vce) Passed 100%!
Of course, you have passed the exam and now have IT experience, and you will never call yourself that again. Congratulations.
